View RURG75120_297397.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

RURG75120
Data Sheet January 2000 File Number 3412.3
75A, 1200V Ultrafast Diode
The RURG75120 is an ultrafast diode with soft recovery characteristics (trr < 125ns). It has low forward voltage drop and is of silicon nitride passivated ion-implanted epitaxial planar construction. This device is intended for use as a freewheeling/clamping diode and rectifier in a variety of switching power supplies and other power switching applications. Its low stored charge and ultrafast recovery with soft recovery characteristic minimize ringing and electrical noise in many power switching circuits, thus reducing power loss in the switching transistors. Formerly developmental type TA49032.
Features
* Ultrafast with Soft Recovery . . . . . . . . . . . . . . . . . . <125ns * Operating Temperature. . . . . . . . . . . . . . . . . . . . . . .175oC * Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . .1200V * Avalanche Energy Rated * Planar Construction
Applications
* Switching Power Supplies * Power Switching Circuits * General Purpose
Ordering Information
PART NUMBER RURG75120 PACKAGE TO-247 BRAND RURG75120
Packaging
JEDEC STYLE 2 LEAD TO-247
ANODE CATHODE (BOTTOM SIDE METAL) CATHODE
NOTE: When ordering, use the entire part number.
Symbol
K
A
Absolute Maximum Ratings
TC = 25oC, Unless Otherwise Specified RURG75120 UNITS V V V A 1200 1200 1200 75
Peak Repetitive Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VRRM Working Peak Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VRWM DC Blocking Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VR Average Rectified Forward Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .IF(AV) (TC = 55oC) Repetitive Peak Surge Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IFRM (Square Wave, 20kHz) Nonrepetitive Peak Surge Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IFSM (Halfwave, 1 Phase, 60Hz) Maximum Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PD Avalanche Energy (See Figures 7 and 8) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EAVL Operating and Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TSTG, TJ
150
A
500
A
190 50 -65 to 175
W mJ
oC
1
1-888-INTERSIL or 321-724-7143 | Copyright
(c) Intersil Corporation 2000
RURG75120
Electrical Specifications
SYMBOL VF IF = 75A IF = 75A, TC = 150oC IR VR = 1200V VR = 1200V, TC = 150oC trr IF = 1A, dIF/dt = 100A/s IF = 75A, dIF/dt = 100A/s ta tb RJC DEFINITIONS VF = Instantaneous forward voltage (pw = 300s, D = 2%). IR = Instantaneous reverse current. trr = Reverse recovery time (See Figure 6), summation of ta + tb . ta = Time to reach peak reverse current (See Figure 6). tb = Time from peak IRM to projected zero crossing of IRM based on a straight line from peak IRM through 25% of IRM (See Figure 6). RJC = Thermal resistance junction to case. pw = Pulse width. D = Duty cycle. IF = 75A, dIF/dt = 100A/s IF = 75A, dIF/dt = 100A/s TC = 25oC, Unless Otherwise Specified TEST CONDITION MIN TYP 90 65 MAX 2.1 1.9 250 2 125 200 0.8 UNITS V V A mA ns ns ns ns
oC/W
Typical Performance Curves
400 175oC 100 100oC 1000 IR, REVERSE CURRENT (A) 175oC 100
IF, FORWARD CURRENT (A)
10
100oC
10 25oC
1 25oC
1
0.1 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 VF, FORWARD VOLTAGE (V)
0
200
400
600
800
1000
1200
VR , REVERSE VOLTAGE (V)
FIGURE 1. FORWARD CURRENT vs FORWARD VOLTAGE
FIGURE 2. REVERSE CURRENT vs REVERSE VOLTAGE
2
RURG75120 Typical Performance Curves
200 175 150 t, TIME (ns) 125 100
(Continued)
80
IF(AV), AVERAGE FORWARD CURRENT (A)
DC 60 SQ. WAVE 40
trr
ta
75 50 25 0 1 10 80
tb
20
0 25
50
75
100
125
150
175
IF, FORWARD CURRENT (A)
TC, CASE TEMPERATURE (oC)
FIGURE 3. trr, ta AND tb CURVES vs FORWARD CURRENT
FIGURE 4. CURRENT DERATING CURVE
Test Circuits and Waveforms
VGE AMPLITUDE AND RG CONTROL dIF/dt t1 AND t2 CONTROL IF L
DUT RG VGE t1 t2
CURRENT SENSE + VDD 0
IF
dIF dt ta
trr tb
IGBT
-
0.25 IRM IRM
FIGURE 5. trr TEST CIRCUIT
I = 1.6A L = 40mH R < 0.1 EAVL = 1/2LI2 [VR(AVL) /(VR(AVL) - VDD)] Q1 = IGBT (BVCES > DUT VR(AVL)) L CURRENT SENSE Q1 VDD DUT R + VDD IV
FIGURE 6. trr WAVEFORMS AND DEFINITIONS
VAVL
IL
IL
t0 t1 t2 t
FIGURE 7. AVALANCHE ENERGY TEST CIRCUIT
FIGURE 8. AVALANCHE CURRENT AND VOLTAGE WAVEFORMS
All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification.
Intersil semiconductor products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see web site www.intersil.com 3

▲Up To Search▲

Price & Availability of RURG75120

	To Download RURG75120 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .